Kioti Key
- Thread starter chuck172
- Start date
- Views: 31778
Rebeldad1
Veteran Member
- Joined
- Sep 16, 2009
- Messages
- 1,604
- Location
- Hughett Bend Washington
- Tractor
- Kioti Tractor, John Deere Mower,New Holland Mini Excavator
call your dealer on the phone and get a couple. they should be able to put them in a envelope and ship fairly reasonable.
you would have them by now.
you would have them by now.
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,190
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
A pretty close blank is a poor substitute for a key that is cut and ready to use when purchased.
koshari
Silver Member
- Joined
- Jul 10, 2019
- Messages
- 227
- Tractor
- Kioti ck35 , Deutz agrolux 4.80e, Deutz Agrotron 6.00 TT, Kobelco sk30ur excavator.
true, but it lets you butcher the top to make a mushroom style key that doesnt brake everytime you hit it with your leg getting on and off the tractor. besides i have access to a key cutter so its no biggie for me.
John Skull
Silver Member
Amazon sells Ilco 10 pack for about $10 + shipping. For the CK10 series the Ilco 1695 works and they're stronger than original Kioti keys. My original started developing a crack and it was only a matter of time until breakage.
heavyequipmentkeys
New member
For future reference, see the link below there are three commonly use keys in Kioti units.
heavyequipmentkeys.com
Kioti Tractor Keys - heavyequipmentkeys.com
Come see our selection of ignition keys for Kioti Tractors and Mechron UTV
heavyequipmentkeys.com
laurencen
Veteran Member
- Joined
- Feb 19, 2007
- Messages
- 1,204
- Location
- saskatchewan Canada
- Tractor
- Bobcat Toolcat 5600T Kioti CK20, Cat D2 dozer, Cat 420 tractor loader, Deer 644E loader, Bobcat E32 mini and Bobcat 590 skidsteer, Toro Groundsmaster 325D
thats a nice looking setup
Oaktree
Super Member
I did this to deal with the bump-knee-against-key problem. Short piece of PVC pipe with a can lid glued to one end, the nut that holds the ignition switch also holds this in place. For sure they didn't really think key placement out very well when they designed this.
northcreek2624
Gold Member
- Joined
- Mar 18, 2001
- Messages
- 486
- Location
- Lake View,N.Y.(WNY)
- Tractor
- KIOTI DK40(2002)) Jacobsen 628D AWD Turfcat
While on the subject, these keys are easy to bump while going in/out and break easily. Next time I break one I will probably leave the indexed part in the switch and fabricate a protrusion on the front to toggle it since security is not an issue for me.
