penokee
Platinum Member
- Joined
- Jul 13, 2004
- Messages
- 531
- Tractor
- Ferguson TO-20 (sold to son-in-law), AC - H3 Crawler, L3130HST, (AC-WD w/Attachments - SOLD), 1984 Honda Big Red, Honda Foreman 4x4 w/plow
Kubota 3130 Tie Downs
- Thread starter Rory_Rhodes
- Start date
- Views: 10945
penokee
Platinum Member
- Joined
- Jul 13, 2004
- Messages
- 531
- Tractor
- Ferguson TO-20 (sold to son-in-law), AC - H3 Crawler, L3130HST, (AC-WD w/Attachments - SOLD), 1984 Honda Big Red, Honda Foreman 4x4 w/plow
I agree with the fellows ref chains. Years ago I took an aircraft loading/lashing course. For trucks, etc. they preferred that chains go from left front on item to right front on floor -crisscross. Also, best angle if you can get it is 30 degrees out from middle line and 30 degrees down from center to floor - sort of a double wye if you look at it right....
Dave in VA
Retired Army Parachute Rigger
Dave in VA
Retired Army Parachute Rigger
