Kubota b7610 and B4672A BH question

[kirbygiampa]

I am about the pull the trigger and buy a Kubota b7610, MMM and BH.

I am concerned with the process of removing the MMM and putting on the BH. Does the sub-frame stay on the tractor? How much time and work is switching from the 2 setups?

I planning on using the tractor 75 percent of the time for mowing, but would like to be able to easily trade options.

thanks, Kirby

 

[ronjhall]

I may be wrong. Isn't the B4672A a 3PH BH?

 

[MoBota]

The "subframe" for this BH is a pair of steel arms that strengthen the frame and help distribute the forces of the BH across the length of the tractor. It is not part of the mounting system as it is indeed a 3 pt. mount BH. The "subframe" does stay on full time and works with the FEL and MMM, I think Kubota calls it thier performance matched system.

 

[ronjhall]

Sometimes I need my mind jogged.
Make sure that a Heavy Duty Top Link Bracket is installed also.
Installing a B4672/90 BH can be very frustrating. It depends on how you store it. Here is a thread on the subject.
http://www.tractorbynet.com/forums/showthread.php?p=703946&mode=linear&highlight=B4690#post703946