Kubota B7610 Engine Starts But Drive and Hydraulics Not Operable

[pjmsj21]

My wife was using our B7610 with our brush cutter when she found that the tractor would not move forward or backward and none of the hydraulics would work. I can easily start the engine but can't lower or raise the front loader, lift the brush cutter or get any movement either forward or backward. I for the life of me cant figure this out.....can you steer me in the right direction?

Thanks

 

[Peter 315]

Is the range selector in neutral?

 

[RalphVa]

Sounds as though the Ujoint (if it has them) off the engine broke. Had this happen on my JD 4010. No hydraulics would work because no power goes to the HST unit.

Ralph

 

[pjmsj21]

The range selector is in the low gear and you can move it from low to neutral to high....so unfortunately that's not it.