kubota b8200 rear axle seal replace ment

[james b]

hi have a b8200 kubota and need to replace the left rear axle seal that is leaking and my question is does any one know if the bearing and seal is pressed on or if it is held on by a snap ring any help/ pics. would be great !!thanks james

 

[brain55]

The inner bearing is either a slight press fit with a snap-ring, or just a slight press fit. Meaning you shouldn't need to take it to a machine shop to have removed. Two pry bars usually does the trick. And for the outer bearing I usually just drive it out with a plastic dead blow hammer. It is really a pretty easy job.

Brian

 

[james b]

thanks for the info i will let you know how it goes

 

[james b]

thanks for the info ! had to use a 3 jaw puller though would not move with pry bars but i got it done thanks again .:thumbsup::drink: