Kubota Backhoe powered from rear remotes of TYM

[myyaz33]

Nice valve.
Not sure I understand how you plan to plumb the valve, so I can't answer your first question.

That is because it really wouldn't make sense unless I wired one of the valve handles open on the new valve. Sorry about that, I didn't think it through well enough.

Anyway, I decided to see what would happen if I just connected the backhoe to rear remotes at 1800psi. Works Great! All cables are 4000psi 2-wire so if something breaks will likely be structural like you said before.

Thanks again for the help. At least I now have a valve for the TopNTilt