bgWI
Member
- Joined
- Jul 4, 2006
- Messages
- 32
- Tractor
- Kubota GL4330
Greetings,
I have the BH90 on a GL4330, fluid in the tires and the L853 ldr. Previously I had a B7800 with the 75 series backhoe - that one was a pain to mount and dismount! The BH90 attaches easily with two pins-you do have to remove the lower arms. That is the most time consuming, maybe 20 minutes. I have the 16 inch bucket and last year added a manual thumb from American Attachments -see their gallery of pics. I'm holding up a maple stump just dug out of Wisconsin clay. As my wife says about our equipment, "size does make a difference" and we now have the right combination for digging. Also just added the WR Long Bush and Root Grapple in 60 inch width. FWIW, as an after thought- I would go with a hyrdaulic thumb, but did not want to do all the plumbing since I swap attachments frequently.
Hope this helps,
Bill
I have the BH90 on a GL4330, fluid in the tires and the L853 ldr. Previously I had a B7800 with the 75 series backhoe - that one was a pain to mount and dismount! The BH90 attaches easily with two pins-you do have to remove the lower arms. That is the most time consuming, maybe 20 minutes. I have the 16 inch bucket and last year added a manual thumb from American Attachments -see their gallery of pics. I'm holding up a maple stump just dug out of Wisconsin clay. As my wife says about our equipment, "size does make a difference" and we now have the right combination for digging. Also just added the WR Long Bush and Root Grapple in 60 inch width. FWIW, as an after thought- I would go with a hyrdaulic thumb, but did not want to do all the plumbing since I swap attachments frequently.
Hope this helps,
Bill
