Bob_Young
Veteran Member
- Joined
- Jul 5, 2002
- Messages
- 1,244
- Location
- North of the Fingerlakes - NY
- Tractor
- Ford 4000; Ford 2000(both 3cyl.);JD40; 2004 Kubota L4300; 2006 Kubota B7610; new 2007 Kubota MX5000
Not supposed to read instructions!!?? Who knew? Now I feel like my whole engineering career was a fraud and a cheat. I'm too old for a do-over!
Speaking of cheats, I'm with Byron Bob: Disconnect the mower, raise the front wheels with the FEL until you can roll the mower forward under them, lower the front wheels/raise the bucket to roll the mower away from the tractor. Reverse to re-install. Works good with B-series and a BX24. Of course if you don't have an FEL, you can't do this. (remember, you heard it from an engineer
)
Bob
Speaking of cheats, I'm with Byron Bob: Disconnect the mower, raise the front wheels with the FEL until you can roll the mower forward under them, lower the front wheels/raise the bucket to roll the mower away from the tractor. Reverse to re-install. Works good with B-series and a BX24. Of course if you don't have an FEL, you can't do this. (remember, you heard it from an engineer
Bob