Dannydjw
New member
- Joined
- Aug 31, 2011
- Messages
- 13
- Location
- Bathurst NB, Canada
- Tractor
- Bolens Iseki G154:,Ariens HT16,model 934: Honda Harmony 1011 ride-on mower converted to 16 HP B&S twin Vanguard
Hi all
I have a g2726 front mount kubota blower . I have converted it to a rear pto mount and changed the rotation. All is fine so far. My question is ,what is the impeller rotation input rpm(not augers) during normal operation on the front of the Kubota. Augers are another step down either threw front gear box or side shaft sprocket. Putting engine rpm aside, i believe the front pto output of the Kubota is 2200 rpm then it is stepped down with a sprocket in front gear box. Stepped down to what RPM is my question?, for normal operation . I have it working ,but i would like to have it run at the rpm it was designed for. thks
I have a g2726 front mount kubota blower . I have converted it to a rear pto mount and changed the rotation. All is fine so far. My question is ,what is the impeller rotation input rpm(not augers) during normal operation on the front of the Kubota. Augers are another step down either threw front gear box or side shaft sprocket. Putting engine rpm aside, i believe the front pto output of the Kubota is 2200 rpm then it is stepped down with a sprocket in front gear box. Stepped down to what RPM is my question?, for normal operation . I have it working ,but i would like to have it run at the rpm it was designed for. thks
