Eddie, first thing I'll say is several years ago, I wanted to add a loader to my first tractor. MadReferee was the one who helped me. Mostly though... he gave me help with the basics, and made me educate myself on my tractor's hydraulic system. He was a tremendous asset to this place and he is certainly missed.
There is lots of reading on this site on exactly what you are doing. At the top of the page there is a search function. Try searching, using terms like top and tilt, TNT, top n tilt, rear remote, etc. I assure you that you can learn all you need to know about your installation without buying a book, or going anywhere else.
Hydraulics are run in series. So if you have a loader, you will come out of the loader valve, plumb back to your valve for your rear remotes and then to your three point hitch. First thing is to figure out if you have just an in and out on your loader valve, or an in, out , and power beyond.
You will then want to choose a valve that best suits your hydraulic flow. Many here buy from Burden Sales
Surplus Center https://www.surpluscenter.com/home.asp Also... C&C is a popular place to buy your TNT cylinders.
Tractor Hydraulic toplinks, Top-N-Tilt, Side link cylinders
So do a few searches, some reading, learn the basics, and you will find lots of help here when you have questions on your install. There are lots of members who have done their own installs.
