Kubota L245DT Stuck Clutch???
- Thread starter randy82
- Start date
- Views: 10222
-
- Tags
- kubota l245 kubota l245dt
alvanko
Gold Member
- Joined
- Mar 10, 2002
- Messages
- 398
- Location
- Hinckley , Ohio
- Tractor
- Yanmar YM186D & Ford LGT14D Dixon Z BX2200D Kubota
Moisture ? Is it oil or water ? Water will cause the clutch disc to "rust" to the flywheel. Possible to un stick by starting the tractor in gear and backing into a tree or solid object with the drawbar . Do this in low range at low RPM's and be ready to pull the shut off if it doesn't break loose . I have had the same problem on a different tractor and this worked good . I always put a block of wood under the clutch pedal arm when tractor is parked. I have the grey model of your L245. Tough tractor !
ronjhall
Super Star Member
Randy
Welcome to TBN. /forums/images/graemlins/smile.gif
Your clutch plate has rusted to to the pressure plate. Here is a thread with some ways to break it loose.
Click Here
Welcome to TBN. /forums/images/graemlins/smile.gif
Your clutch plate has rusted to to the pressure plate. Here is a thread with some ways to break it loose.
Click Here
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
It's probably been setting for a while, hasn't it?
Anyway...sometimes you can break a frozen clutch by aggressively starting and accelerating several times. You might try forward and reversing too, if you can switch gears.
If that doesn't do it, you probably have to split the tractor and replace the clutch, pressure plate and throw out bearing.
Sorry for the bad news...but that's normally the drill with rust welded clutches.
If you do manage to break it free, make sure you block the clutch (use a piece of wood or something on the clutch pedal) during periods of extended inactivity..or exercise it once a week (set on the seat and pump the clutch pedal a dozen times or so).
Good luck!
Anyway...sometimes you can break a frozen clutch by aggressively starting and accelerating several times. You might try forward and reversing too, if you can switch gears.
If that doesn't do it, you probably have to split the tractor and replace the clutch, pressure plate and throw out bearing.
Sorry for the bad news...but that's normally the drill with rust welded clutches.
If you do manage to break it free, make sure you block the clutch (use a piece of wood or something on the clutch pedal) during periods of extended inactivity..or exercise it once a week (set on the seat and pump the clutch pedal a dozen times or so).
Good luck!
