jedens
Bronze Member
I've lost my manual for my tractor. I want to get a hydraulic port selector to put on my power beyond port. Is that port a 1/2" or 3/4" port? Thanks for the help!
Kubota L4610 Power Beyond port
- Thread starter jedens
- Start date
- Views: 1793
-
- Tags
- kubota l4610
uhmgawa
Gold Member
</font><font color="blue" class="small">( I've lost my manual for my tractor. I want to get a hydraulic port selector to put on my power beyond port. Is that port a 1/2" or 3/4" port? Thanks for the help! )</font>
Unsure of what you are trying to do. Power beyond typically feeds the pump
port of a downstream valve in a static configuration.
If it is a Husco series 5000 sectional valve the power beyond port is either
SAE10 or SAE12 ORB depending on whatever option Kubota chose.
Unsure of what you are trying to do. Power beyond typically feeds the pump
port of a downstream valve in a static configuration.
If it is a Husco series 5000 sectional valve the power beyond port is either
SAE10 or SAE12 ORB depending on whatever option Kubota chose.
L3710GV
Bronze Member
On a 3710 it's a Husco valve- power beyond port is 1/2" it takes a straight thread o-ring type fitting
Also note that hydraulic circut can be taped at rear right side of case- you will see a triangle shape cover block-this is where the kubota remotes bolt on- on gearmore top and tilt kit they just made a alluminum block drilled for oil passage and fittings and bolt it on where the triangle block was, return is connected to a nearby hole that has a rubber plug in it
Also note that hydraulic circut can be taped at rear right side of case- you will see a triangle shape cover block-this is where the kubota remotes bolt on- on gearmore top and tilt kit they just made a alluminum block drilled for oil passage and fittings and bolt it on where the triangle block was, return is connected to a nearby hole that has a rubber plug in it
