Kubota la1150 loader support brackets, how to use

Walkintall9000 · May 3, 2021

There are two brackets across the front of my loader and I assume they are support brackets to hold the loader up when working on the tractor, but I don't know how to use them or where they go. Any help would be appreciated. Thanks!

RjCorazza · May 3, 2021

I believe the brackets you are referring to are used to support the loader arms when removing the fel from the tractor.

Walkintall9000 · May 4, 2021

They could be, they go from one side to the other and are attached to two pins. But I don't have any idea how to use them or how they attach. Lol. Thanks for your help!

Walkintall9000 · May 4, 2021

Walkintall9000 said:
They could be, they go from one side to the other and are attached to two pins. But I don't have any idea how to use them or how they attach. Lol. Thanks for your help!

That is a pic of the arms I am talking about!

Walkintall9000 · May 4, 2021

Maybe if anyone had a pic of them in use I could see how they attach. Thanks for the help!

5030 · May 4, 2021

You have an owners manual? It will explain the attachment points.

RjCorazza · May 4, 2021

I haven't seen a setup like that. My previous L3410 had a bolted on crossover brace in the same location, and drop down bars on the loader arms to support the fel when removing from the tractor. Maybe look for some unused pins on the loader arms that match up to the holes in those brackets.

Hopefully someone with a similar loader will chime in.