Kubota Phd

workingman · May 15, 2005

Just purchased an older used kbota phd. Does anyone know what model and an online dealer for parts? New member but have been reading posts and educating myself for a while. You guy's are good.

thcri · May 15, 2005

First welcome to TBN. What might be very help ful is for you to go back in and completely fill in your profile. This way we at least know your whereabouts and then people in your area can help you first and this would be helpful to you. They can lead you to dealers in your area. Again welcome to TBN, you will find all kinds of information here.

murph

KiotiJohn · May 15, 2005

Welcome to the forum. To perform the procedure mentioned by thcri, go to the top of the page and click on MY HOME. Then scroll down to Personal information, email, password, etc. click edit and fill in the information. This will help all to help you better.
John

ronjhall · May 15, 2005

<font color="blue"> Does anyone know what model and an online dealer for parts? </font>
Welcome to TBN. /forums/images/graemlins/blush.gif
Give TractorSmart a try.
I don't know where you live in NC.
Carver Equipment Co. Hwy 301 South, Dunn, NC 28334, 910-892-7171 should be able to help also.
Do you have a picture of the phd?

workingman · May 15, 2005

New to forums and yet to purchase a digital camera.(stoneage). Just purchased this phd last night and am currently at work. I just wanted to get a jump on parts as I haven't even hooked it up yet. Phd has a 9"auger and the cutting edges need replacing(1st item needed) gear box turns freely but have not checked oil. Price was $175.00 didn't figure I could go wrong.

ronjhall · May 15, 2005

I do not think you are going to get much information on parts today. Most dealers are not open on Sunday. You can email. They will reply first thing in the morning.
The current model PHD is a BL80A. A brochure from 1999 shows the same model. Should be easy to get parts for it.
$175 for a working <font color="orange"> Kubota </font> PHD is a steal. I believe they wanted well $1000 when I priced one.

Scrounger · May 16, 2005

All of the Kubota PHDs are made by Worksaver so you should be able to contact them for parts too. www.worksaver.com is the url.

workingman · May 16, 2005

Hooked up the PHD this morning after checking and filling oil. Had a few problems with handle rusted and bent slightly. Fired her up and she ran great at different speeds but yet to dig a hole. If only someone needed a post hole dug today.

Thanks for your responses. This is a great place to learn and share info.