Kubota rear wheels

   / Kubota rear wheels #1  

leoball

New member
Joined
Dec 25, 2013
Messages
14
Location
Logan, WV
Tractor
Kubota L3010
Hello all, I have a 2003 Kubota L3010 tractor -it has hoop type wheels on the rear-4 bolts and a deep offset (24 X W15L is stamped on the rim). The tire size is 420/70-24-- the center of the wheels are breaking and I would like to buy some rear wheels and tires. Contacted a wheel and tire place in Ohio and they advised its a metric bolt pattern and that I would have to buy from a dealer?
It is a six lug, 6 5/8" with a center hole of 5 3/8". It is a four wheel drive and the front tires are 16.5"
Would appreciate any guidance at all.
Thanks, Leo
304-687-2730
 
   / Kubota rear wheels #2  
More than likely it is a 170mm bolt dia (6.693") and has a 135mm center pilot hole (5.315"). Are you sure there not 6 bolt wheels?
 
Last edited:
   / Kubota rear wheels #3  
Hello all, I have a 2003 Kubota L3010 tractor -it has hoop type wheels on the rear-4 bolts and a deep offset (24 X W15L is stamped on the rim). The tire size is 420/70-24-- the center of the wheels are breaking and I would like to buy some rear wheels and tires. Contacted a wheel and tire place in Ohio and they advised its a metric bolt pattern and that I would have to buy from a dealer?
It is a six lug, 6 5/8" with a center hole of 5 3/8". It is a four wheel drive and the front tires are 16.5"
Would appreciate any guidance at all.
Thanks, Leo
304-687-2730
Contact Hey Wheel Co. HEY WHEEL HOME-WHEELS, RIMS, AIRCRAFT TIRES FOR AG USE.

They have everything. I bought new wheels to replace my industrial R series tires with Ag tires to conform to our planting widths. They sent me the rims then sent an invoice later. Nice folks .
 
   / Kubota rear wheels
  • Thread Starter
#4  
Hello all, I have a 2003 Kubota L3010 tractor -it has hoop type wheels on the rear-4 bolts and a deep offset (24 X W15L is stamped on the rim). The tire size is 420/70-24-- the center of the wheels are breaking and I would like to buy some rear wheels and tires. Contacted a wheel and tire place in Ohio and they advised its a metric bolt pattern and that I would have to buy from a dealer?
It is a six lug, 6 5/8" with a center hole of 5 3/8". It is a four wheel drive and the front tires are 16.5"
Would appreciate any guidance at all.
Thanks, Leo
304-687-2730
I found center disks at a Kubota dealer--thanks.
 

Tractor & Equipment Auctions

2018 Ford Fusion Hybrid Sedan (A53424)
2018 Ford Fusion...
2007 Sterling Acterra Dump Truck (A51691)
2007 Sterling...
1985 Ford Ltl9000 Tender Truck (A55302)
1985 Ford Ltl9000...
2023 Bobcat T66 (A50120)
2023 Bobcat T66...
2015 Eager Beaver 15HBB-PT T/A Flatbed Equipment Trailer (A50322)
2015 Eager Beaver...
2018 FREIGHTLINER CASCADIA TANDEM AXLE DAY CAB (A54607)
2018 FREIGHTLINER...
 
Top