Kubota Rear Work Light

[K10]

Orangeman1 -- I am at this point no where near the 400 hour mark which I believe is about which you need to inspect and or adjust the axle pivot. I am ordering a shop manual which is probably a wise investment and will help dissect some of the more potentially complicated tasks.

 

[ByronBob]

---------------------------------------------------------------------------------
Yes, I think the BX7330 is correct for a BX series, and if the pics shown in some of the older post are correct, it looks better than the simple lamp included with the B7331 kit.

I have this light as my wife got it for me for Christmas last year. It'll do anything i need it to do. I have it forward in the summer to cut grass and back in the winter to snowblow with.

About $75 and install is only about an hour.

FWIW....I tore the lamp apart when I got it just to see how it was built. PITA to put back together so pray the bulb doesn't blow.

I personally like it. Has the on / off switch on the bottom of the unit instead of mounting one on the dash or somewhere else.

 

[sailnseagulls]

I had the dealer install the kubota worklight when I bought my BX23. It is that same part number and came orange with a chrome/silver trim ring around the bulb. Very nice unit and I liked the way it installed and wired into the exsisting pigtail under the seat. I decided last winter to purchase two more for the top of the rops to face foward. They came in black with a black eyebrow type ring. They did have the same part number and got them through the dealer wholegoods. The dealer said they must have changed manufactures for the lights. I ended up painting them orange and flipping the eyebrow ring so it was upright when I mounted them under the rops. Didn't seem as nice as the original light...but ok for my purposes.