kubota vs. Kioti?

[k0ua]

If you have the lift up and push the Kubota into float, you will hear a hissing sound and the Kubota lift will come down at a slower rate than the Kioti. The Kioti will not hiss and the lift will drop rapidly. They will both contact the ground with a pressure relative to whatever the arms/cylinders SSQA and bucket or other implement weighs.


Interesting, I didn't think you could drop it into the float position and it will come down slower.

Well at least that is the way my L3400hst with La463 loader valve worked. ( I have and old video to prove it)

 

[k0ua]

If you have the lift up and push the Kubota into float, you will hear a hissing sound and the Kubota lift will come down at a slower rate than the Kioti. The Kioti will not hiss and the lift will drop rapidly. They will both contact the ground with a pressure relative to whatever the arms/cylinders SSQA and bucket or other implement weighs.


Interesting, I didn't think you could drop it into the float position and it will come down slower.

Try it on yours the next time you are out and report back, so we will know if it is unique to the 463 loader or the same on yours.. have the lift up about 2 feet and shove it into float quickly, and see if it drops in a controlled manner or drops like a rock (Kioti drops like a rock).

James K0UA

 

[Hdoilcan]

Talked to the Kubota dealer today and he dropped the price $700 after talking to his rep because its a L40 model and they want to clear this years models out. So that sounds a little better.
I kinda didn't want a cab model (what I think I will be doing I think I could take it or leave it) so is a little hard to spend the extra vs getting a backhoe instead. For the extra $7000 for the Kubota I'd be getting (what counts to me) a little bit physically size smaller tractor (this means a lot for me but not a deciding factor) that has enuff loader lift for what I'll be using it for, the cab, and the HSTC plus and a local dealer I really like.
Ill know it the morning my final decision.

 

[KenB2920]

Try it on yours the next time you are out and report back, so we will know if it is unique to the 463 loader or the same on yours.. have the lift up about 2 feet and shove it into float quickly, and see if it drops in a controlled manner or drops like a rock (Kioti drops like a rock).

James K0UA

You make me want to step outside and try it now!!! Lol.... Is there a benefit to it being able to drop into float?

 

[KenB2920]

Talked to the Kubota dealer today and he dropped the price $700 after talking to his rep because its a L40 model and they want to clear this years models out. So that sounds a little better.
I kinda didn't want a cab model (what I think I will be doing I think I could take it or leave it) so is a little hard to spend the extra vs getting a backhoe instead. For the extra $7000 for the Kubota I'd be getting (what counts to me) a little bit physically size smaller tractor (this means a lot for me but not a deciding factor) that has enuff loader lift for what I'll be using it for, the cab, and the HSTC plus and a local dealer I really like.
Ill know it the morning my final decision.

I truly think you'll be happy with either.... SLEEP TIGHT !!! SWEET DREAMS!!!

 

[94BULLITT]

Well at least that is the way my L3400hst with La463 loader valve worked. ( I have and old video to prove it)

You just push forward on my 4240.

 

[TSO]

You just push forward on my 4240.

Same with my LS ... a nice smooth controlled drop, relatively quick.

 

[Gittyup]

Try it on yours the next time you are out and report back, so we will know if it is unique to the 463 loader or the same on yours.. have the lift up about 2 feet and shove it into float quickly, and see if it drops in a controlled manner or drops like a rock (Kioti drops like a rock).

James K0UA

My Kioti drops at some controlled rate, not like a rock. I characterize it as a soft landing, guessing it drops at < 1 foot per second. I can lower faster by overtly actuating the hydraulics to go down just short of float. Then it will drop very fast, depending on RPMs. No matter really, float is float. And it's a must.

 

[DK35vince]

No matter really, float is float. And it's a must.

A must for what.
I never use the float feature.
Tried using it several times, but don't get the point of it myself.

 

[TSO]

A must for what.
I never use the float feature.
Tried using it several times, but don't get the point of it myself.

I use the float function almost every time I use the loader. it's great for whenever your scoping up debris, you can just float the bucket edge on the ground in drive along well scooping. it's also fundamental for back dragging when you want a very smooth feathered surface.

I had never really learned how to use it on my Kioti, but now that I use it on this tractor, it's a must-have.