kubota
- Thread starter coving
- Start date
- Views: 1574
Rustyiron
Super Member
No dealers close by?
Messick's in PA I believe is one that will ship parts. They are "on TBN" and reply to posts now & then when they can be helpfull.
They have a good web site that I browse through looking for used equipment, not much of that around here that's not worn out x3 :laughing: !
Messick's in PA I believe is one that will ship parts. They are "on TBN" and reply to posts now & then when they can be helpfull.
They have a good web site that I browse through looking for used equipment, not much of that around here that's not worn out x3 :laughing: !
Code54
Elite Member
- Joined
- Aug 20, 2005
- Messages
- 4,426
- Location
- Putnam Co. West Virginia
- Tractor
- Kubota MX5100, Kubota BX25D,1957 Farmall Cub Lo-Boy Kubota KX91-3, BCS 853
Yep -look up Messicks on google and they have a good website that will guide you to the parts you need or just give them a call.
Code54
Elite Member
- Joined
- Aug 20, 2005
- Messages
- 4,426
- Location
- Putnam Co. West Virginia
- Tractor
- Kubota MX5100, Kubota BX25D,1957 Farmall Cub Lo-Boy Kubota KX91-3, BCS 853
See if this is what you want
Kubota: Lower Radiator Hose, Part # 15371-7285
Kubota: Lower Radiator Hose, Part # 15371-7285
LD1
Epic Contributor
Find part number.....then google search it.
But if it was me, I'd take the old one to someplace like NAPA, autozone, etc.
Just get one that is the right diameter......and has a bend similar to what you need. Cut to fit utilizing a factory bend in the hose. Pretty easy to do if a hose has a single bend in it. Little more challenging matching something up if the hose has a couple of bends .
But if it was me, I'd take the old one to someplace like NAPA, autozone, etc.
Just get one that is the right diameter......and has a bend similar to what you need. Cut to fit utilizing a factory bend in the hose. Pretty easy to do if a hose has a single bend in it. Little more challenging matching something up if the hose has a couple of bends .
Code54
Elite Member
- Joined
- Aug 20, 2005
- Messages
- 4,426
- Location
- Putnam Co. West Virginia
- Tractor
- Kubota MX5100, Kubota BX25D,1957 Farmall Cub Lo-Boy Kubota KX91-3, BCS 853
Here is one on Ebay - looks like under $6.50 shipped to your door
New KUBOTA Lower Radiator hose B71 D B71 HST-E B71 HST-D
New KUBOTA Lower Radiator hose B71 D B71 HST-E B71 HST-D
silvertramp
Gold Member
That's what I had to do with my Yanmar. I ordered online and 2 out of three hoses did not fit. Vendor insisted that they were correct. Who knows?? I went to 2 parts stores and found diameters/bends that would work. The ends I cut to fit.
