kubta rtv 1100 ???

[countryboy8]

Hi im considering buying a kubota 1100 for our property and thought about putting a boss v plow on it to plow our half mile driveway which is gravel but i dont know if it will work if anyone has any expierience please let me know thanks

 

[texasjohn]

I have 1140 two seater, extremely capable, don't have snow plow experience in Texas. :laughing:

 

[David_Kb7uns]

Looks to work well.


[ame=http://www.youtube.com/watch?v=Y7dbwdiaEb0]Kubota RTV900 with Boss V plow snow - YouTube[/ame]

[ame]http://www.youtube.com/watch?v=D3SwENX5RpE&feature=mfu_in_order&list=UL[/ame]


David Kb7uns

 

[Solitude]

I have the kubota plow made by Curtis.It plows great but you have to be patient with the shifting when pushing up snow banks!

 

[timswi]

I have the kubota plow made by Curtis.It plows great but you have to be patient with the shifting when pushing up snow banks!

Same set up as mine...All and all, it works great and much cheaper than a V.

Just came in from plowing...It's almost zero here...Told the wife that there are times that I miss my quad...Tonight wasn't one of them.

Nothing like moving snow with the heat and radio on...Flannel shirt and a beer..Life is good.

 

[countryboy8]

Does havving a plow on a rtv wear it out or break easy ?

 

[timswi]

Does havving a plow on a rtv wear it out or break easy ?

Nope...These things are tanks.

 

[countryboy8]

Thanks and if i got the sand spreader option from kubota how hard are they to take of for in the summer

 

[Solitude]

I have a sno dog sander and it works fine.I think two guys could lift it easily out of rtv bed.I have a come along hung from ceiling in my garage and it comes right off.The spinner comes off separate it's all electric with plug ins.Not a big deal at all to put in and take off.

 

[xerman]

Just put a Boss V plow on my 1100. We haven't had much snow yet but for what we have had it works great. I have a 2000 foot drive and large parking area. I found a thread on this forum that works great. Buy a 4' X 6' horse stall mat from Tractor Supply ($40.00) cut a strip 1' X 6' off the mat cut that into 2 three foot by one foot pieces. Sandwich those strips between the plow cutter blade and the plow it self. Let it hang down below the cutter blade about 3 or 4 inches. I cut the mat with a sawsall and drilled the holes with a spade bit.It works great at not digging into the gravel and pushing the gravel into the lawn. But still does a great job at pushing the snow.