shasta
Bronze Member
Will the optional drawbar housing interfere with the remounting or operation of the backhoe on my L 39 provided I remove the drawbar itself first? Thanks
L 39 owners please advise.
- Thread starter shasta
- Start date
- Views: 691
monkeymonk
Silver Member
As far as I know it won't.On my 48 it's right next to the BH bar mount (horizontal) under the rear between the tires snug.39s have the 3pt storage under the BH thats where it may snag or be snug to fit. I can't imagine the "optional" drawbar housing would interfere as the 39 is a TLB series and any factory option setup should fit right in snug as a bug in a swatter.
although i do not own a 39 i looked at them real real hard...nice machine neighbor. siskiyou
although i do not own a 39 i looked at them real real hard...nice machine neighbor. siskiyou
Howdy Neighbor! thanks for the advise...it looks like it would be really tight. I was worried that I would get the lower "ears" hooked and then drop the backhoe down to put the upper pins in and have it hit the drawbar housing and then bend or break something. I already took it back off and replaced the backhoe, so I will try next time I have it off again. Thanks!
