L-4610 852 FEL Bucket leveling?

[BeeBop]

Does anyone in here know any adjustments or known problems in the leveling of buckets on this model loader? I can let mine to the ground and one side will touch 1 1/2'' before the other side touches. I can lay the bucket on the ground and it lies flat so the bucket is straight. Can anyone help w/this problem?

 

[Charliebrn]

I think what may have to be done is to carefully loosen the mounting bolts at the frame, give a little down-pressure on the bucket and then re-torque the mounting bolts. Seems like I remember someone with a larger tractor having to do that to fix the same issue...

 

[kubmech]

Beebop, before you go to too much trouble, check your tire pressures (with a gauge) they may look ok but may be off enough to mess with the loader.

 

[BeeBop]

This may be worth a try, I guess this would be an warranty issue since it entails trying to break loose these loader bolts. I guess a trip to the dealer is definitely in order.

 

[BeeBop]

I checked the tires kubmech and all checked fine. What else can I do ?

 

[Golfgar4]

<font color=blue>"What else can I do ?"</font color=blue>

Kick it and swear at it? /w3tcompact/icons/hmm.gif/w3tcompact/icons/eyes.gif

Sorry, couldn't resist! That's what I'd be doing !! /w3tcompact/icons/wink.gif/w3tcompact/icons/smile.gif

 

[BeeBop]

LOL, already tried that, only hurt my foot. /w3tcompact/icons/crazy.gif If it were green I guess I would have kicked the loader off of it. /w3tcompact/icons/smile.gif

 

[MDSteve]

Let me know if you get it fixed. I am having the same problem with my 3710. I am going to check my tires tonight.

Steve

 

[BeeBop]

You will not believe this but for no reason other than rotary cutting one of my fields the problem has been solved, straight as an arrow. Go figure? I lifted the front wheels up a few times w/the bucket in my garage and perhaps the bumps in the field straightned things out?? How can you beat orange tractors, they even fix themselves /w3tcompact/icons/smile.gif

 

[Bird]

Hmmm, everything may be fine, but if it was not level before and is now, I think I'd be looking real close at all the mounting nuts and bolts to see if I could find any loose ones and tighten them up real good while everything's level.