L295 4wd

[stepdoctor]

Has anyone had experience with fixing the 4wd on a L295. How difficult is it to remove the front drive shaft? Any suggestions, Thanks

 

[trol]

The front drive shaft has three bolts holding the shield or cover on. You'll need to remove all three. Slide the back half of the telescoping cover forward as far as you can. On the shaft that is exposed there will be a coupling with a snap ring on both sides of it. Slid both snap rings out of the way. Drive the coupling towards the rear of the tractor, they sometimes put locktight on the shaft/coupling so you may need to use a tourch to losen the locktight.
Good Luck TROL