L3450 How do I pull the fan to replace bearing?

[gfs]

I need to disassemble the fan shaft in order to replace the fan shaft bearing. This is for the cooling fan radiator. It looks as though it is tacked on with welding. Is it screwed on or press fit? Any suggestions? thanks,

 

[gfs]

I need to disassemble the fan shaft in order to replace the fan shaft bearing. This is for the cooling fan radiator. It looks as though it is tacked on with welding. Is it screwed on or press fit? Any suggestions? thanks,

 

[ronjhall]

Welcome to TBN. /forums/images/graemlins/smile.gif
You will need a Work Shop Manual (WSM) and Parts List. I took a look at the parts list for your tractor. It shows that the shaft is bolted to the fan and pump. You should be able to find a parts list for your tractor on Ebay. Here is one. Click Here
You can also contact TractorSmart They can email you a copy of the parts list and sell you the new bearing.

 

[ronjhall]

Welcome to TBN. /forums/images/graemlins/smile.gif
You will need a Work Shop Manual (WSM) and Parts List. I took a look at the parts list for your tractor. It shows that the shaft is bolted to the fan and pump. You should be able to find a parts list for your tractor on Ebay. Here is one. Click Here
You can also contact TractorSmart They can email you a copy of the parts list and sell you the new bearing.

 

[Egon]

"Not knowing the configuration of your tractor"

In some cases it may be easiest to pull the radiator to work on the water pump.

Egon /forums/images/graemlins/grin.gif

 

[Egon]

"Not knowing the configuration of your tractor"

In some cases it may be easiest to pull the radiator to work on the water pump.

Egon /forums/images/graemlins/grin.gif

 

[gfs]

Thanks for the advice. TractorSmart have been very good and gave me the help I needed. thanks for the link.

 

[gfs]

Thanks for the advice. TractorSmart have been very good and gave me the help I needed. thanks for the link.