Backhoe L35 Engine Oil
- Thread starter lrhall
- Start date
- Views: 11412
PAPPASMURF
Gold Member
- Joined
- Apr 24, 2012
- Messages
- 338
- Location
- JACKSONVILLE, AL
- Tractor
- 2011 KUBOTA L3200 W/ LOADER, BH77 BACKHOE
DO YOU HAVE A MANUAL ON THE TRACTOR? HAS A DEALER TOLD YOU WHAT OIL THEY RECOMMEND? I JUST POSTED A THREAD CALLED "WHAT OIL DO I USE?" AND IT WAS IN REGARDS TO MY L3200. I WOULD BET THAT YOU CAN USE THE SAME THING I DO : ROTELLA 15W-40. ITS THE MOST POPULAR OIL FROM WHAT I HAVE BEEN TOLD FOR TRACTOR DIESELS. MY DEALER RECOMMENDED 10W-40, AS DOES MY MANUAL, BUT AS LONG AS ITS A "C" RATED DEISEL OIL YOU WILL BE FINE. AS TO HOW MUCH....NOT SURE THERE, BUT MY L3200 HOLDS 6.5 QUARTS. ROTELLA IS SOLD BY THE GALLON (4 QUARTS) SO I BOUGHT TWO GALLONS AND THEN CHECKED THE DIP STICK, ADDED A LITTLE AND CHECKED AGAIN UNTIL I REACHED THE PROPER LEVEL. BEST ADVICE I CAN GIVE IS THAT IT NEEDS TO BE DEISEL OIL....THERE IS A DIFFERENCE BETWEEN DEISEL AND STANDARD MOTOR OILS. HOPE THIS HELPS.:smurf:
PAPPASMURF
Gold Member
- Joined
- Apr 24, 2012
- Messages
- 338
- Location
- JACKSONVILLE, AL
- Tractor
- 2011 KUBOTA L3200 W/ LOADER, BH77 BACKHOE
Sorry about the all-caps and underline there! by the way...Welcome to TBN!!
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
a quality diesel oil ( c rated ) in a viscosity for your temp range. that means it's likely gonna be a 15w40 or 5w40 synthetic.
