Bruce Smith
Member
I have a Kubota L 3901 with a little over 900 hours. I noticed an oil puddle on the shop floor after warming up the tractor. The oil was I believe Transmission/ Hydraulic oil. I shut it down immediately. Temperature was below freezing in the garage. The oil was to clean to be engine Oil. The dip stick on the center of floor board was at the add mark. I raised the hood and the trickle was coming down the middle side of the engine that lines up with the alternator (Left Side) from the driver position. It's so cramped in that area I couldn't assertain even with a brite light where exactly where the source of the leak was. I have it at the dealership to assertain the leak. They are still trying to identify. I recommended they put Dye in the oil to see it better. I cannot figure what Hydraulic item is within that area to be the culprit. Any help would be appreciated. The leak is not under pressure. HELP!!