leds conversion before and after

[jonsstihl]

Here is a before and after comparison of the tl3240 stock replacement LED lights. these are plug and play with the kubota connector

just bought two to do the back since they get used the most when clearing snow but after seeing the difference I may get two more to do the fronts.

I got these from Larsen lights.

I still can't believe that tractor manufacturers get away with no LED lighting package on a 70,000 $ tractor.

 

[airbiscuit]

 

[Smokeydog]

Big difference.

 

[cqaigy2]

I'll take door number 2. Much brighter!

 

[BravoXray]

I installed LEDs in the headlights on my BX and the difference was amazing as the pictures show.

 

[jonsstihl]

thanks for posting the attachment as a thumbnail. what I like about these is the fact that they are plug and play and that they actually look factory. they have the same shape as the factory lights only with way more output.

 

[jonsstihl]

forgot to also mention that they do not interefere with radio reception but they are on the back and the antenna is on the front for what its worth.

 

[Jstpssng]

I've been looking at something like this but was wondering if they draw any more juice than factory. If so, can the wiring handle it?

 

[5030]

Much less.

 

[BravoXray]

I've been looking at something like this but was wondering if they draw any more juice than factory. If so, can the wiring handle it?

Normally, as long as the LED is the same form factor, they will draw less power. If you replace an 1156 type bulb with a 3 foot light bar, well then all bets are off.