gunny0628
Gold Member
So I took a stab at welding a small lever for the hydraulic top link. I welded it to a cable clamp and then clamped it in place. It was a rainy day project.
3-Point Hitch Lever fabrication
- Thread starter gunny0628
- Start date
- Views: 2687
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,281
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
I see it but what does it do?
OP
gunny0628
Gold Member
It’s to move my hydraulic top link in and out so I don’t have to go inside the cab.
OP
gunny0628
Gold Member
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,281
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Ok, thanks.
Many years ago I had a piece of PVC pipe with a 90 on it so I could do the same thing with my open station tractor while standing on the ground.