Lift pin spacing

   / Lift pin spacing #1  

droy

Silver Member
Joined
Feb 12, 2004
Messages
222
Location
Southwest Louisiana
Tractor
NH Boomer 55, ZD1211
After pricing around, I bought a couple of new toys for my 1715 Ford from the local Case IH dealer. A friend accompanied me when I went to p/u the attachments, & he was also impressed with their prices, leaving there considerably lighter in the checkbook. The salesman noticed me looking at their quickhitch, & later called me & offered it to me @ a nice price for the added business. After bringing it home, I noticed I can only use it on a couple of tools, & will need to modify the rest. I'm wondering if there is a standard width for the lift pins on tools that are set up for quickhitch, before I start the modification project. Thanks in advance
BTW, we're talking Cat 1, as you'll probably already know
 
   / Lift pin spacing #2  
Here is a link to a site that has 3PH dimensions. Click Here
Dimensions are at bottom of page.
Quick Hitches have been discussed here quite a few times. Do a search. Most of them experienced same problems you are.
 
   / Lift pin spacing #3  
FWIW, you can increase or decrease non-standard implement pin spacing by installing them facing out, or facing each other. Sometimes that's enough to make them QH compatible, without going to the trouble of modifying anything.

//greg//
 
   / Lift pin spacing
  • Thread Starter
#4  
Thanks for the replys, & in the future, will try to remember to use the search feature; I didn't think my situation was a common one, but putting a little thought into it, I can see I'm not the only tractor owner around. Also turning my pins "a half a round", won't work for me (not that lucky),but I do have a working relationship with Mr. Lincoln & Mr. Victor. Thanks again !!!
 
 

Tractor & Equipment Auctions

Cat TH407C Telehandler (A51039)
Cat TH407C...
2025 78in Rock Bucket Skid Steer Attachment (A50322)
2025 78in Rock...
2014 Ford F550 4x4 Bucket Truck with Versalift SST40 - 45FT Working Height (A51039)
2014 Ford F550 4x4...
20 STEEL FLAT SHEETS (A50854)
20 STEEL FLAT...
2013 KENWORTH T370 DUMP TRUCK (A51406)
2013 KENWORTH T370...
2007 Case IH 2588 4WD Combine (A50657)
2007 Case IH 2588...
 
Top