LIFT RAMP RACK

[LBrown59]

Has anybody built such a thing for a S-cut?
It sure would make it easier to service from underneath if you had it raised a foot or two.
It would come in handy for removing the mower blades for sharpening too.

 

[LBrown59]

Got the Idea from this picture

http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=49895

 

[AndyM]

<font color="blue"> Got the Idea from this picture

http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=49895
</font>

Now you have me interested...
Can you post a picture for those of us who aren't registered at the forum to which you posted the link? Thanks!

 

[acs55812]

Don't worry about it unless you REALLY wanna run your cut up on a couple picnic table benchs and then lay underneath it!!! /forums/images/graemlins/frown.gif

 

[JASTN70D]

Sure that sounds reasonable, Do they make picnic table benches that will hold 2000 pounds each????? /forums/images/graemlins/crazy.gif

 

[LBrown59]

Can't believe nobody's built themselves one.

I would have sworn somebody on here was sharp enough to have done it.

 

[MossRoad]

There's nothing under my tractor that ever needs service! /forums/images/graemlins/wink.gif

 

[LBrown59]

<font color="blue">There's nothing under my tractor that ever needs service!

MossRoad

********* <font color="#666666"> ****************************
There is on mine.

Engine oil drain plug
Tranny Filter
Tranny super udt drain plug
udt screen
mower blades
</font> ******************* </font>

 

[Mith]

LB, why dont you be the first.
For example the ditch mower, youve been given loads of ideas, but I dont see your progress thread, I mean I'm bad for not just sticking to one project at a time, but atleast I start one before I work out the next one! /forums/images/graemlins/grin.gif
Hey, make sure you Life Ins is topped up before you drive your CUT up onto 2 picnic benches. On the other hand, it would probably be less dangerous to roll your tractor onto its side to do the work on the underside.
Or pay some dude at the local shop to do it, if everybody climbed around in the dirt under their tractors to change thr oil and repair them I would be without a job. If you cant figure out how to get your tractor up off the ground safely to do that you might just be one of those people /forums/images/graemlins/shocked.gif
In other words, more do, less replying to old posts about things that you might do /forums/images/graemlins/crazy.gif

 

[acs55812]

</font><font color="blue" class="small">( Sure that sounds reasonable, Do they make picnic table benches that will hold 2000 pounds each????? /forums/images/graemlins/crazy.gif )</font>

<font color="blue">Not sure ---I will ask me MIL next time I see her </font> /forums/images/graemlins/grin.gif