lifting arms

[jack707]

Well the rain let up enough to get the tractor out and unload the plow from my pick up, as far as the dia. I need the plow holes are 1/2inch and my tractor are 7/8 the top link fits.

 

[jimmysisson]

Change the pins. If you really have 1/2" pins they're too small for a two bottom plow anyway. Jim

 

[jack707]

Well what have have to do now is take my 4 1\2 grinder with a cut off wheel and cut the pins and weld up two 7\8 pins in place.

 

[jimmysisson]

No way or place to use bolt-on pins? I'm amazed your 1/2" pins aren't bent.
Jim

 

[jimmysisson]

Have you no place to use bolt-in pins? Not sure this link will work as an example

http://agrisupply.cachefly.net/images/xxl/28588.jpg

 

[jack707]

That's what I have there no place with threads so I have to cut and weld it on.

 

[smstonypoint]

Can anyone explain the presence of 1/2" pins for the lower links? That's smaller than for a Cat. 0.

Steve

 

[jack707]

The plow is a Ferguson type 12-2 28 number 40982 I guess someone could look it up.