Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Back up.
Post us a picture and a model ID number. 'later'? front end????
All AG chassie model 3 cyl 4000's had the same front end.. there was no early / late front end. ( there are some steering gear / power steering differences yes. )
Industrial and rowcrops models and SU models had different front ends.
When we see the picture, we will know what you have, and we can go from there.
Post us a picture and a model ID number. 'later'? front end????
All AG chassie model 3 cyl 4000's had the same front end.. there was no early / late front end. ( there are some steering gear / power steering differences yes. )
Industrial and rowcrops models and SU models had different front ends.
When we see the picture, we will know what you have, and we can go from there.
That info came from a thumbnail you posted some time ago. My front end looks like the thumbnail picture on the right in that post. It does not have radius rods and the thumbnail stated that front end was used on later model tractors if that helps. I am out of town presently dealing with Harvey and will post a picture when I get back home.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Hmm.. jumping around and referencing old threads without a link makes answering your questions difficult. I browse on a phone, not a computer.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
in 2 posts you have said 2 different things. Here you say right, in the other post you said left.
which is it?
left is 65+ ag adjustable front axle
like this
http://www.tractorbynet.com/forums/...901298-ford-4000-strong-enough-4000hdaxle-gif
which is it?
left is 65+ ag adjustable front axle
like this
http://www.tractorbynet.com/forums/...901298-ford-4000-strong-enough-4000hdaxle-gif
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
No problem, I can't help it that you posted 2 different things, then won't man up and say that it was your mistake. I'll have to remember your handle so I can avoid offering any help on any future Ford problems you WILL encounter while caring for and feeding these old beasts.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
A very poor taste post....
sd455dan
Super Member
- Joined
- Oct 23, 2012
- Messages
- 6,527
- Location
- North Idaho
- Tractor
- Rhino 554, Ford 550 TLB (JD X500, MTD, Gilson riding mowers) Ford 3000-Sold
Soundguy has helped Many Many old Ford tractor owners over the years, me included. He is also 1 of the early formative members of this site.
And deserves some respect.
The OP has been a member for a whole month and unless I am mistaken forgot a major rule he agreed to when joined-
where do the rules of conduct Allow a statement like that..?
And deserves some respect.
The OP has been a member for a whole month and unless I am mistaken forgot a major rule he agreed to when joined-
where do the rules of conduct Allow a statement like that..?
kuschneider
Silver Member
Agreed. Soundguy is an invaluable resource to me when I have had questions. If someone were to chase him off with a post like that I'd kick em right in the shins
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Dont worry, not going anywhere, at least till the good Lord calls me. 
I give respect when it is due, snotty, sarcastic and confused replies to simple questions do not earn anyone's respect. Poke the bear and pay the price. BTW any advice or usable information coming from him was non existent. I'll leave you old boys to your depends and geritol as I have found a much better site for usable information.
kuschneider
Silver Member
You found a "much better site". So....get lost. I am sure the other site will be delighted to have you.
Birdhunter1
Veteran Member
You're the one that got snotty, Soundguy knows Ford tractors well and I hope when you go looking for front end parts after putting a loader on your machine you have as much success at your other source of information when it comes to buying parts. Good luck, you won't be missed.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
He was the confuses one, in a reply with diagrams he identified as having one type, then in another discussion he identifies the other.
He says 2 different things and I'm the confused one.... Right..
He says 2 different things and I'm the confused one.... Right..
void777
Gold Member
akcfi
your remark was in bad taste.
your remark was in bad taste.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
bad down here. fuel low, no power or other utilities. spotty cell service. looks like I lost my diesel farm/daily truck. Fridge acting iffy on the generator.
Duke energy needs to quit 'assessing damage' and start turning the power back on.
Sad deal is.. sure.. there are a few trees down and lots of messes.. but overall in the 3 counties I've had to drive thru to help my parents and inlaws, basically.. I've only seen 3 power lines down, and a handfull of trees in open, non utility damaging areas.... There just is not alot of visual utility line damage.. yet no phone, tv, internet, and power. there are complete dark cities here at night. Where I am is kinda high on a little florida hill, and I can look out over 2 cities south of me.. it's like north korea at night.. no lights.
Duke energy needs to quit 'assessing damage' and start turning the power back on.
Sad deal is.. sure.. there are a few trees down and lots of messes.. but overall in the 3 counties I've had to drive thru to help my parents and inlaws, basically.. I've only seen 3 power lines down, and a handfull of trees in open, non utility damaging areas.... There just is not alot of visual utility line damage.. yet no phone, tv, internet, and power. there are complete dark cities here at night. Where I am is kinda high on a little florida hill, and I can look out over 2 cities south of me.. it's like north korea at night.. no lights.
skylarkguy
Platinum Member
Hey SG I hope you are getting things back together down there and are doing ok.
