Loader Hydraulic Cylinders Frozen: BX2360

[snpower]

Hey Hey if there is an award for most issues in 48 hours I'm the winner.

I took off my loader in a bit of a hurry yesterday when I decided to take my 2360 in to the dealer to have the deck leveled. I'm trying to re-attach the loader and I can't get the white or yellow lines on. Usually adequate movement of the joystick when the loader is attached, or, waiting awhile alleviates this problem. Not so. It's been since this morning that I tried. I can't manually move either cylinder either. Perhaps I didn't bleed enough pressure off before I detached it ? The Red and Blue lines for bucket curl snap in place just fine. Did I mention I fly jets for a living

 

[aczlan]

Loader side probbaly has pressure. Loosen the quick connects on the hoses or insert a dowel into the quick connect, wrap a rag around it and tap on it with a hammer to release the pressure.

Aaron Z

 

[snpower]

Loader side probbaly has pressure. Loosen the quick connects on the hoses or insert a dowel into the quick connect, wrap a rag around it and tap on it with a hammer to release the pressure. Aaron Z

Done and thanks.