Solo
Platinum Member
At one point I found pictures of a FEL that someone had mounted a rear blade to. Does anyone know where I might find it?
Solo
Solo
loader mounted blade
- Thread starter Solo
- Start date
- Views: 1679
shoppintractors
Veteran Member
- Joined
- Jul 31, 2003
- Messages
- 1,219
- Location
- Southeast, Michigan
- Tractor
- Shoppin', Formerly Ford 1220, 7106 FEL, 60
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,550
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
</font><font color="blue" class="small">( Farm and Fleet was going out of buisness )</font>
Hmmm? Must have been a single store, because Farm and Fleet is going strong, last week when I was there. Fleet Farm is also going strong, and for my taste, is a more complete store.
Now maybe there are multiple 'chains' that call themselves Farm and Fleet. I think the one in the midwest is Blainey's Farm and Fleet.
Hmmm? Must have been a single store, because Farm and Fleet is going strong, last week when I was there. Fleet Farm is also going strong, and for my taste, is a more complete store.
Now maybe there are multiple 'chains' that call themselves Farm and Fleet. I think the one in the midwest is Blainey's Farm and Fleet.
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
The John Deere 419 FEL has a blade attachment (bucket drops off, blade goes on) that has the appearance of a rear blade mounted on the loader frame.
I expect the the other Deere FEL's have a similar attachment.
I expect the the other Deere FEL's have a similar attachment.
bluecon1
Bronze Member
I mounted a rear blade on my loader arms too. Removed the bucket and cylinder, mounted the blade, and even used the bucket cylinder to angle the blade. Works great. I windrow the snow as much as I can, then turn around and hit it with my snow blower. I'll try to post a couple pictures, but at this moment, do not have the blade installed. The width was almost perfect for the loader arms.
WVBill
Veteran Member
Could have been my adaptation in This Thread
bluecon1
Bronze Member
bluecon1
Bronze Member
OK, I think I got the hang of attaching a picture, so I'll explain further. The loader arms attach to the blade via two bolts that are the same diameter as the bucket pins. The bucket cylinder is removed, and a top link is installed to hold the position of the blade. In this picture, you can see where the bucket cylinder is attached (I apologize, I have the bucket on right now, so you cannot get the full picture.) I had to lengthen the hydraulic lines on the cylinder to accommodate the new position. The angle feature works great.
AndyM
Veteran Member
- Joined
- Jul 4, 2003
- Messages
- 2,369
- Location
- NW PA, USA
- Tractor
- 1948 Ford 8N and 1993 Toro WheelHorse 520H
<font color="blue"> Must have been a single store, because Farm and Fleet is going strong, last week when I was there. Fleet Farm is also going strong, and for my taste, is a more complete store. </font>
QUALITY Farm and Fleet closed all of their stores due to bankruptcy a couple of years ago. Many of them reopened as Tractor Supply Company locations.
QUALITY Farm and Fleet closed all of their stores due to bankruptcy a couple of years ago. Many of them reopened as Tractor Supply Company locations.
