Loader no workie

[Rkrollins62]

Ok I have a Ford 5000 with a new Holland 270LT loader The other day I was lifting something fairly heavy when I went to come back down it wouldn’t come down I could bleed it down by cracking the line at the cylinder tighten it back up she would raise the bucket tilts good but won’t come back down I’ve checked all the lines The quick disconnects when I try to get it to raise or lower the lines vibrate and the motor on the tractor shutters like it’s trying to work but it will not come back down

 

[wdchyd]

Is your 3PH lever stuck in the raise position ?

 

[LD1]

You say it has quick disconnects, and things shutter and the motor on the tractor indicates a load like its trying to work....you probably have a quick connect partly decoupled of or just faulty.

Problem is you can re-connect them under pressure, and the weight of the loader in the air is putting them under pressure.

You need to find a way to support the loader (another loader, jack and 4x4 post, etc) and unhook and reconnect the couplers for the lift/lower