Loader on L2800
- Thread starter racer86y
- Start date
- Views: 1093
Roadworthy
Elite Member
I suspect a picture would help. What lever? What control box? If the control box is the one for the front loader the little lever may be the interlock on the control. It just prevents accidental movement of the control lever for the loader.
bullbreaker
Elite Member
While you're at it on the L2800/L3400 Bota you might want to look under between where your feet go on the deck for the suction return hose . There notorious for cracking on those and providing slow hydrolics. Hose cheap @ dealer and real easy fix .
Also search here on TBN some good threads on legally bumping up your FEL capacity. Did mine easy to do . Others here have had issues with the under seat attachment cable assembly. Also check for leaks around your site glass .
I had it's big brother the L3400 DT / STICK TRANNY . Not the hydro version . IMO really good tractor.
Also search here on TBN some good threads on legally bumping up your FEL capacity. Did mine easy to do . Others here have had issues with the under seat attachment cable assembly. Also check for leaks around your site glass .
I had it's big brother the L3400 DT / STICK TRANNY . Not the hydro version . IMO really good tractor.
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,083
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
I never use "small lever" when I had my L2800...lock.
Keep close eye on sight glass level.
Keep close eye on sight glass level.
Ok,that makes sense.
old and tired
Veteran Member
Down at foot level, your left foot...
azbinder
Gold Member
IIRC, it is on the left side of the transmission housing in line with the foot rest. Just inside of the left foot.
Thanks.I will look tomorrow
LD1
Epic Contributor
IF you didnt get one, go to a kubota dealer and get an owner/operators manual