tcarter1
Bronze Member
I'm starting a log splitter project. I am looking for suggestions on where to purchase the various parts/components.
thanks.
thanks.
Log Splitter Components
- Thread starter tcarter1
- Start date
- Views: 2555
MrJimi
Elite Member, Rest in Peace
Take a look at
northern tool .com
northern tool .com
sandman2234
Super Member
- Joined
- Dec 4, 2005
- Messages
- 6,040
- Location
- Jacksonville, Florida
- Tractor
- JD2555 and a few Allis Chalmers and now one Kubota
I have a friend who purchased a very used splitter, and broken splitter. He started by having the cylinder rebuilt, but then I found him a really good deal on an almost new one. Plus the guy was willing to trade "stuff" for it. So he has a bunch of parts he really doesn't need.
What parts are you looking for?
David from jax
What parts are you looking for?
David from jax
sandman2234
Super Member
- Joined
- Dec 4, 2005
- Messages
- 6,040
- Location
- Jacksonville, Florida
- Tractor
- JD2555 and a few Allis Chalmers and now one Kubota
He actually has all the parts, but I was thinking about buying them for the cylinder. Me and a friend are considering building a FEL for his B6000, and I thought a single cylinder tilt would be ok to work with.
His I-beam has trailer tires and the tank plus a pretty good sized foot for you to plop the wood on. Horizontal/vertical which is the only way to go.
Motor hasn't been started in about 7 months, so no telling on that.
David from jax
His I-beam has trailer tires and the tank plus a pretty good sized foot for you to plop the wood on. Horizontal/vertical which is the only way to go.
Motor hasn't been started in about 7 months, so no telling on that.
David from jax
Wayne County Hose
Veteran Member
- Joined
- Aug 24, 2007
- Messages
- 2,325
- Location
- Wayne County Pa.
- Tractor
- Massey Ferguson model 85, Allis-Chalmers WD-45
Baileynet.com: Main Page
Cheaper than Northern and phone operators with knowledge.
Cheaper than Northern and phone operators with knowledge.