SwampmanLA
Silver Member
- Joined
- Feb 9, 2008
- Messages
- 130
Finally had time to build this baby log splitter. It is about 8 tons and does what I need it to. Built it for under $250 with parts from Surplus Center.
Log splitter
- Thread starter SwampmanLA
- Start date
- Views: 2025
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 63,317
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Tested it out yet?
OP
SwampmanLA
Silver Member
- Joined
- Feb 9, 2008
- Messages
- 130
Yes I split some 8" oak with no issue.
smilindave
Bronze Member
Very nice. What size cylinder did you use
OP
SwampmanLA
Silver Member
- Joined
- Feb 9, 2008
- Messages
- 130
I think it is 3"
MuncyBob
Platinum Member
Nice job! Next you need a cradle on that beam, sure has saved my back over the years.
OP
SwampmanLA
Silver Member
- Joined
- Feb 9, 2008
- Messages
- 130
Yes a cradle is in my plans. Have a few other things at the top of my list now so it my be awhile.
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
3 in cyl, 1.5 shaft
At 2500 psi you would have 8 ton +
At 3000 psi you would have 10 ton +
At 2500 psi you would have 8 ton +
At 3000 psi you would have 10 ton +