You're entirely welcome; and you're right about how "fun" these are to work on
Do you have an operator manual for yours? My 460 came from the grandson of the original owner, so I lucked out. Don't know how easy it is to find an operator manual, only mentioning this because of a
WARNING mine has when
changing the 3 point hitch between position control and DRAFT control - they WARN you to NEVER move the draft selector lever unless you have the implement LIFTED -
Somewhere I remember reading that if you mess this up you need to
disassemble the lift to un-do it; probably in the SERVICE manual, but I'm too far behind in too many projects to try and find it at the moment -
Anyway, I don't know if the 560 uses the same hitch design, maybe you could post a picture of the lift/draft control of yours - if the levers are arranged the same, it's likely that so are the internals. I don't use my 460 for any ground engaging implements, only scrapers/mowers, etc, so I just leave it OUT of draft control. If this is the case with you, you could just raise the lift all the way, move the draft lever DOWN, and not move it.
Anyway, if you get time post pics of those controls AND the toplink attachment area and I'll tell you what LITTLE I know :laughing: ...Steve