looking for a thread

   / looking for a thread #1  

tomd999

Platinum Member
Joined
Jul 22, 2007
Messages
654
Location
Viva Manchvegas!
Tractor
'10 3320 cab
Hiya,

Sorry to be a pain but there was a thread last week that had a link to someone that made a tilt and top setup for their 2320 or 2520 that had a 3 spool setup with 2 rear QC outlets. I tried searching for an hour to no avail, does anyone remember it and can point me to it?

Thanks and sorry for the novice post,

Tom
 
   / looking for a thread #2  
Tom, I have been looking for this thread too as I am interested in adding at least a 2 port Prince valve on the back of my 2520. I have looked in the hydraulic section above and found some useful info. The post I remember had pics and some good documentation but have not been able to find it either. I guess I will copy interesting posts to a folder on my hard drive for future reference since things seem to disapear.
 
   / looking for a thread #3  
I don't think it disappeared, you just haven't found it yet. I often see posts from as far back as 2003 on some google hits. Keep asking for it, I'll bet the author is still around, along with many who've read/posted on it.
 
   / looking for a thread #8  
Sure, go for the guy with the pretty install, nice paint job and welder instead of my clumsy attempt at duct taping a valve to the back of the tractor ;)
 
   / looking for a thread #9  
Jeff and JC, Thanks for refreshing our memories. I had read both of your posts and found them more useful than the dealer supplied two hose rear outlets that connect to the FEL valve. Thanks again.

Dan
 

Tractor & Equipment Auctions

Ford 641 Workmaster (A50514)
Ford 641...
2022 JCB HM180T Hydraulic Breaker Excavator Attachment (A49461)
2022 JCB HM180T...
Oil Well Pump Jack with Motor (A49461)
Oil Well Pump Jack...
(2) 500 GAL WATER TANKS (A50854)
(2) 500 GAL WATER...
10 LUG ALUMINUM RIM (A50854)
10 LUG ALUMINUM...
71061 (A49346)
71061 (A49346)
 
Top