Looking for a valve boot

   / Looking for a valve boot #1  

orezok

Super Member
Joined
Jan 30, 2004
Messages
6,026
Location
Mojave Desert, CA
Tractor
Kubota B7800
I have a C&C TNT on my 7800 that has given be excellent service for 17 years. The boot finally disintegrated and it appears to be seeping below the boot. Does anyone recognize this valve manufacturer?

Boot2.jpg
 
   / Looking for a valve boot #2  
Not sure, but couldn't just order a boot on my LS xg3025. I used several coats of liquid tape and it has held up for a year. I have also used black permatex rtv in the past.
 
   / Looking for a valve boot
  • Thread Starter
#3  
After taking some measurements, it looks like an axle CV boot might work
 
   / Looking for a valve boot #4  
If seeping oil I would suspect the seals on the end of the spools are weeping. Usually a pretty easy repair but you would have to remove the joystick assembly.

On the boot no clue if they are a standard size.
 
   / Looking for a valve boot
  • Thread Starter
#5  
I found and cv axle boot that worked perfectly.

7817F81A-F5B8-4908-9DDF-DB9C2A9CE822.jpeg
 

Tractor & Equipment Auctions

2016 R and R Products 331 LP Reel Mower (A55851)
2016 R and R...
2015 FREIGHTLINER CASCADIA (A53843)
2015 FREIGHTLINER...
SLIDE MASTER ALUMINUM SLIDES (A54757)
SLIDE MASTER...
2018 Ford Transit Connect XL Cargo Van (A55852)
2018 Ford Transit...
2025 Heavy Duty Ratchet Load Binders and Chain Set (A55788)
2025 Heavy Duty...
2007 Ford E-150 Cargo Van (A55788)
2007 Ford E-150...
 
Top