Looking for a valve boot

   / Looking for a valve boot #1  

orezok

Super Member
Joined
Jan 30, 2004
Messages
6,030
Location
Mojave Desert, CA
Tractor
Kubota B7800
I have a C&C TNT on my 7800 that has given be excellent service for 17 years. The boot finally disintegrated and it appears to be seeping below the boot. Does anyone recognize this valve manufacturer?

Boot2.jpg
 
   / Looking for a valve boot #2  
Not sure, but couldn't just order a boot on my LS xg3025. I used several coats of liquid tape and it has held up for a year. I have also used black permatex rtv in the past.
 
   / Looking for a valve boot
  • Thread Starter
#3  
After taking some measurements, it looks like an axle CV boot might work
 
   / Looking for a valve boot #4  
If seeping oil I would suspect the seals on the end of the spools are weeping. Usually a pretty easy repair but you would have to remove the joystick assembly.

On the boot no clue if they are a standard size.
 
   / Looking for a valve boot
  • Thread Starter
#5  
I found and cv axle boot that worked perfectly.

7817F81A-F5B8-4908-9DDF-DB9C2A9CE822.jpeg
 

Tractor & Equipment Auctions

2017 FORD F250 SUPER DUTY EXT CAB SERVICE TRUCK (A53843)
2017 FORD F250...
2023 WESSEX RMX500 LOT NUMBER 44 (A53084)
2023 WESSEX RMX500...
New/Unused 78in Quick Attach Skid Steer Grapples (A54865)
New/Unused 78in...
Spirit scooter (A55787)
Spirit scooter...
2023 UNVERFERTH 432 LOT NUMBER 32 (A53084)
2023 UNVERFERTH...
2018 Wacker Neuson RTSC3 Trench Compactor (A54865)
2018 Wacker Neuson...
 
Top