Looking for a welder

[CDennyRun]

If you can drill a hole to bolt it on, I can weld the assembly up for you, with a mounting bracket. PM me dimensions, and I can fab it really cheap. Odds are I have the material, and wouldn't charge for that.

Regards,

Chris

 

[BigTruckMan]

If You can drill a 3/8 or 1/2 hole in the top of your bucket ,you can make a simple level indicator by bending a piece of 1/8 x 2 or so flat bar ,similar to a Kubota bucket level indicator . Or you give me some measurements of your bucket angle,and I can make one for you .I own a welding / fabrication shop, and I have a hydraulic bending brake , so it would be a piece of cake to make one.

 

[orezok]

Most muffler shops have a guy that can weld.

 

[jp2code]

I want to see what this contraption looks like.

I can't ever tell if my front bucket is level.

 

[bcp]

The inverted L shape, black and white, is the most basic Kubota bucket level indicator. The top surface is parallel to the bottom of the bucket.

From another thread somewhere on TBN:



Bruce

 

[jp2code]

My little BX2200 has a Kubota loader.

The L4400 came with an Ansung loader.

Standard L Series

It doesn't have that level indicator.