Looking for an answer ?
- Thread starter GrayBeard
- Start date
- Views: 1104
sterlingtrucks
Member
- Joined
- Apr 10, 2004
- Messages
- 26
- Location
- U.P. Michigan, Marquette County
- Tractor
- Cub 7284, Cub RZT22
it is open center
8 GPM 1,500 PSI
Hope this helps.
8 GPM 1,500 PSI
Hope this helps.
DmansPadge
Veteran Member
- Joined
- Oct 3, 2004
- Messages
- 1,699
- Location
- Orange, TX
- Tractor
- Kubota B2620, Toro 2000 Series Z Master
Take a look at cubcadet.com. If you click on the model you are looking at, below the picture of the tractor there is a link to "download specific information" ... that should give you all the info you need.
My Dlr. got a response from Cub.
The auxilary pump for the loader and hoe is a closed center pump set at about 1900 psi.
I did see where the "main" hydro pump is open center at 1500 psi.
'Don't know why the main is "open" and the aux. is "closed" but that's what they said.
Just thought I'd pass this on.
GrayBeard
The auxilary pump for the loader and hoe is a closed center pump set at about 1900 psi.
I did see where the "main" hydro pump is open center at 1500 psi.
'Don't know why the main is "open" and the aux. is "closed" but that's what they said.
Just thought I'd pass this on.
GrayBeard
