abears3
New member
Thanks for the reply...I was hoping it was something simple like a low battery or alternator. Guess I need to load the old goat up bring it back to the dealer.
Good morning. I also have a xu5065 open station that the transmission falls out of gear for a cpl seconds then drops back in. The dealer says poss trans control module causing it. I see you posted you found one for $400. They quoted me $720 for the module. Could you post a link or send me a email where you found it for that price possibly? Thank you in advance.Dealer replaced inoperable poweshuttle control module (right of seat, underneath 3PH lever) on XU5065CPS, and programmed it to "factory" default setting. Resolved operation but engagement was extremely aggressive regardless of the switch setting (travel/work). A handheld computer was used to drop the setting from ~80 to 8 and it restored the smooth engagements. My theory is that that PS module is somehow defaulting back to the aggressive "factory" tune but why: temp? wiring? electrical/module issue? FYI: the module is about $400 and requires the whole right side of cab interior to be pulled apart to be replaced. Also there is some PS wiring that runs between the fuel tank and frame. The connectors are prone to inadvertent disconnection when running thru tall grass and brush when cutting. If you ever pull the tank, good opportunity to examine and tape/zip tie as a preventive measure. Best of luck with your PS issues.
Ok thank you. I was praying that he had a place to get parts less exp then the dealer.That's probably a 2016 price he posted.....
Now, 12 years later, $720 sounds about right....