LSTractor Control Valve Problem

BrittCook · Mar 13, 2016

LSTractor XR3032HC
Having problems with my G827S0102 Remote control valve. Tractor is almost new & Detent Control is very difficult to get in and out of detent. Tractor is under warranty by I am quite a distance from my distributor. Anyone with similar problem or solution?

George2615 · Mar 14, 2016

Welcome to TBN................

If this just started happening there may be an internal problem with the valve that will require disassembly and repair.
If the tractor is new it will loosen up with use.

Wagtail · Mar 14, 2016

G'day Mate and welcome to TBN from Downunder.

Not knowing how experienced you are; have you shut off the engine and released the hydraulic pressure before operating the detent control?

I hope I haven't miss-read your problem.

TBN Support · Mar 14, 2016

Welcome to the forum. :welcome:

Hopefully you'll find some answers between this thread and your one over in the LS section. :thumbsup:

BrittCook · Mar 14, 2016

Used the Valve all last summer with stump grinder. It was very difficult to get in & out of detent. Had to use 2 hands to keep from going too far when it engaged. Thought it was probably in the valve but thought I would check to see if anyone had experienced this. Thanks much for the info.