skipmarcy
Veteran Member
I'm not sure, it's obviously different from mine so what I said may be out the window for yours.... If it is the same design yes, you can knock the old one out fairly easily with a heavy bladed screwdriver or chisel, taking care not to scratch the wall of the hole that the cup seals against. Then I use a large socket that fits the cup well and knock it back in with a compothane hammer so as not to damage my socket. I don't recommend trying to install it by using a punch or similar around the edge of it, you will distort the cup and it won't seal well. Be careful not to damage the rubber coating on the cup too.