Main Lug or Main Breaker to feed shop?

   / Main Lug or Main Breaker to feed shop? #11  
I would have run 200a service to the meter.
Put a service disconnect under the meter.
Feed a 200 amp sub panel in the house from the disconnect.
Put a 100 amp breaker in that house sub panel to feed the garage.
Put a 100 amp sub panel in the garage off of that feed with its own disconnect.
Bob's your uncle.
 
   / Main Lug or Main Breaker to feed shop? #12  
For $100 you can get a meter base with a 200 amp breaker/passthrough (this one) and another $40 will get you a 100 amp breaker (this one).
As a bonus, you can buy a interlock kit for another $40 and legally backfeed a generator into that panel to feed whatever you want to power.

Aaron Z
 
   / Main Lug or Main Breaker to feed shop? #13  
Again, it has been a number of years since I've been involved in Electrical construction. Codes continually change.
It would be a good idea to consult a currently licensed electrician rather than an old fart who hasn't been licensed for some years. :thumbsup:
You were a licensed electrician?
 
   / Main Lug or Main Breaker to feed shop? #14  
Haven't been in the trade in some years. Not sure if licenses expire or not, I was a licensed journeyman, my brother is a master. I don't plan on going back to the craft, unless my brother and I decided to go into business or something. But, being 5 years away for retiement, that probably won't happen either.
 

Tractor & Equipment Auctions

UNUSED PAIR OF MINI RUBBER TRACKS (A52706)
UNUSED PAIR OF...
MURRAY PUSH MOWER (A55745)
MURRAY PUSH MOWER...
1999 WEST WIND 30FT PINDLE FLATBED DOVETAIL TRAILER (A58214)
1999 WEST WIND...
TUGGER TRAILER (A55745)
TUGGER TRAILER...
2020 Kinze 3505 High Speed 6/11 Planter (A56436)
2020 Kinze 3505...
MARATHON 20KW GENERATOR (A55745)
MARATHON 20KW...
 
Top