Massey 1740M code

[ronT]

I have a 1740 M with 49 hours. I was looking at the dash gauge and noticed either a lower case o or 0 followed by FF. Has anyone seen this before?

I have a 1755m recently purchased and it shows "OFF" unless I engage the pto. Black display button lower left does nothing. Was told that Display Button feature only works on a HST not a Power Shuttle that I have.

 

[homesteader13]

I have a 1755m recently purchased and it shows "OFF" unless I engage the pto. Black display button lower left does nothing. Was told that Display Button feature only works on a HST not a Power Shuttle that I have.

On my 1742 with power shuttle it would scroll through the 2 screens and also show you any active codes.
My 1755 with HST works the same way.
Both are cab models.

 

[Ccdteacher]

Thanks you for the information. Ours is a HST. Does that mean each time I am going to have to push the black button to get to the MPR?

 

[homesteader13]

Thanks you for the information. Ours is a HST. Does that mean each time I am going to have to push the black button to get to the MPR?

You should not, it should default if you have it on MPH when you shut it off and turn it back on.

 

[Ccdteacher]

You were correct, it was for the PTO. I had to push the little black button to get to the MPH screen.
Thank you for your help