mitchhorne8
Member
Lowered the attachment point on the carry all yesterday. Clearance is much better now. I don't understand why it comes like that.
Massey Ferguson 1700 series in Action, A Picture Thread
- Thread starter Scut 4 Big Bucks
- Start date
- Views: 26126
edgarrian
Platinum Member
OP
Scut 4 Big Bucks
Silver Member
I bought the Titan Attachments pallet forks for my tractor recently. Easy on, easy off. Work great, at a great price.
plowhog
Elite Member
- Joined
- Dec 8, 2015
- Messages
- 4,048
- Location
- North. NV, North. CA
- Tractor
- Massey 1710 / 1758, Ventrac 4500Y / TD9
Used my GC1710 to trench between two buildings. Dug from the edge of one building to the center. Then turned around and did the same with the second building. That left the tractor as a helpless orphan straddling the 2 foot deep trench with no way out.
Finally used some 4x4's, 3/4 plywood, the front hydro and the backhoe to drive/lift/push the tractor back to driveable land.
Finally used some 4x4's, 3/4 plywood, the front hydro and the backhoe to drive/lift/push the tractor back to driveable land.
