Mattock Handles. Why?

   / Mattock Handles. Why? #51  
Agreed. I wrote a short, sad but true story about it once. But I think in the story I used the term pick axe rather than mattock but I’m not sure. Been a long time since I looked at it.
Pick axe/ mattock all the same Just plain hard work.
 
   / Mattock Handles. Why? #53  
If’n the head slides down the Mattock hasn’t been used for a time and the handle is dry.

I can also go back three generations of mattock use. Got one in the shed that only goes back a verifiable two generations.
I bought my mattocks in 1978. The only time I loaned it, the handle broke.
 
   / Mattock Handles. Why?
  • Thread Starter
#54  
Follow up to post #9 above. Cut a blank from the ash slab. Dried it over a heater vent for a week or so. Turned handle on the lathe. The handle hole is round and tapered. The ash was very hard. Took a long time to cut it down. Got a little tear out in a few places but sanded it smooth. Made handle long enough to use with two hands if needed. It is a fairly small tool and I gave it to my wife for her gardening. The handle is in the head firmly but I put a stainless screw in just in case.

IMG_2437.jpg
 
   / Mattock Handles. Why?
  • Thread Starter
#56  
I thought about narrowing it in the middle down through the grip for better appearance and lighter weight but figured I’d keep it thick for better strength.
 
   / Mattock Handles. Why? #57  
That came out good! 👍
 
  • Good Post
Reactions: N80
   / Mattock Handles. Why? #58  
I think this is called a grub hoe. It has probably been in my family for 80+ years. The handle is pretty loose and looks fragile. Sort of want to keep it as is.

0D4DEE0C-1AFE-4169-833D-CD855AE134D4.jpeg
 
   / Mattock Handles. Why? #59  
I was at my mother's house last weekend and decided to dig out a tree stump. I picked up my father's maddock and went to work. Talk about a loose head! It was held on with a screw, similar to what the OP did yet it was sloppy and I was a bit concerned about it coming off. About that time my dog came over to supervise, so I had to be extra careful.
It got the job done, though. 👍
 

Tractor & Equipment Auctions

Auger (A50860)
Auger (A50860)
2013 Cadillac XTS Sedan (A48082)
2013 Cadillac XTS...
2012 CATERPILLAR 259B3 SKID STEER (A51242)
2012 CATERPILLAR...
2013 TRAVIS BODY & TRAILER, INC. ALUMINUM BELLY DUMP (A50854)
2013 TRAVIS BODY &...
F-500 POWER PUMP 500HP TRIPLEX POWERED BY 3412 CATERPILLAR ENGINE (A50854)
F-500 POWER PUMP...
Fuel Tank (A50860)
Fuel Tank (A50860)
 
Top